Dealership parts pricing?

This is the place to post any topics related to the NJBMWCCA Community that don't fall into the other categories.
Post Reply
jnscaldwell
Posts: 1102
Joined: Mon Oct 29, 2007 2:53 pm
Location: Millstone Twp., NJ

Dealership parts pricing?

Post by jnscaldwell »

Looking to do a job this weekend and need a substantial list of OEM parts. Tired of the hassle of dealing with shipping and stock on items from my usual internet based sources. Not opposed to driving to get the items. Can anyone tell me which NJ dealer has the best pricing and/or gives the best CCA discount? I would prefer to patronize a club sponsor if at all possible.

Thanks
17 F15 X5 40e
17 F25 X3 28i MSport
11 E92 M3 ZCP
04 E46 325cic
93 E36 325is - JS #172
12 Ford F350 King Ranch dually

cfaust
Posts: 313
Joined: Wed Sep 15, 2004 2:24 pm
Contact:

Post by cfaust »

It's worth reiterating that it's not just the discount but also the list price. Not all dealers charge MSRP for all items.


FWIW, when I was rebuilding my M3 I faxed/emailed a list of all the part numbers I needed to dealers in our area (and a few outside NJ that offered good discounts) and let them compete on price.

It was also interesting that no one vendor was cheapest across the board, and that individual part numbers varied by over 100% at times.

Chris
Image
1996 318ti - Street
1989 325is - Track
1988 M3 - Garage
2005 Expedition - Tow

kbsilver
Posts: 413
Joined: Wed Sep 15, 2004 2:24 pm
Location: Morristown

Post by kbsilver »

Same goes for 'book time' for the same job. I had a large repair to be done and 3 dealers gave 3 different times (which of course is x the hourly rate) for the exact same job. The range was 2:1.
-Keith

'11 335D & '17 340GT

jnscaldwell
Posts: 1102
Joined: Mon Oct 29, 2007 2:53 pm
Location: Millstone Twp., NJ

Post by jnscaldwell »

Circle BMW comes through for me again. Parts pricing with our CCA discount is only 8-10% higher than Tischer and they blew away three other local dealers I checked pricing with. Circle had everything I need in stock. I am really amazed at the huge disparity in pricing between dealerships. I know where I will be going from now on.
17 F15 X5 40e
17 F25 X3 28i MSport
11 E92 M3 ZCP
04 E46 325cic
93 E36 325is - JS #172
12 Ford F350 King Ranch dually

cgraff
Posts: 227
Joined: Thu Feb 10, 2005 3:23 pm
Contact:

Post by cgraff »

jnscaldwell wrote:Circle BMW comes through for me again. Parts pricing with our CCA discount is only 8-10% higher than Tischer and they blew away three other local dealers I checked pricing with. Circle had everything I need in stock. I am really amazed at the huge disparity in pricing between dealerships. I know where I will be going from now on.
Even though I don't live near Circle BMW anymore, I do all my parts purchasing through them. They really have great customer service, and even if pricing may not be the best, they more than make up for it via lack of shipping expenses and the fact that they will do their best to get what you need.

This is one of those cases where I'm happy paying the slight premium for service that is second to none.

-Chris

sgoatley2001e46
Posts: 391
Joined: Thu Jan 10, 2008 4:49 pm

Post by sgoatley2001e46 »

I realize I'm catching this post a little late. For what it's worth to our North Jersey club members, BMW of Roxbury has provided me a huge savings. Very often they'll sell me the part for just barely over cost. It probably helps that I usually talk with the same person. The discount is usually 20% at a minimum or better.

RealM3E30
Posts: 979
Joined: Fri Jan 14, 2005 7:55 pm

Filters ???

Post by RealM3E30 »

Anyone have a good price on OEM E36/E46 M//3 oil filters ??? I will reveal what I $$ for one today. R 8)

kishg
Posts: 968
Joined: Sun Aug 27, 2006 2:57 pm
Contact:

Post by kishg »

circle rocks! best bmw dealer service experience i've had so far.

BJerolimic
Posts: 747
Joined: Wed Sep 15, 2004 2:24 pm
Location: Glen Ridge, NJ . . . . . . '98 318ti - '01 M5 - '08 X5

Re: Filters ???

Post by BJerolimic »

RealM3E30 wrote:Anyone have a good price on OEM E36/E46 M//3 oil filters ??? I will reveal what I $$ for one today. R 8)
here's a good spot to look:
http://www.trademotion.com/partlocator/ ... yID=123145
Image

and gone but not forgotten:
'00 323Ci Steel Grey / Black Dinan & UUC & Schnitzer mods
'89 325iX Diamond Black / Black 4dr 5spd Dinan chip, Ireland exhaust, H&R+Koni
'01 525iTa

MTROIS
Posts: 460
Joined: Thu Sep 18, 2008 7:08 pm
Location: Northern NJ
Contact:

Post by MTROIS »

What is the typical CCA discount that one should anticipate to receive from dealers on parts?
2019 M2 Competition (Euro Delivery!)
2008 M3 Coupé
1995 M3 LTW
...all Manual Transmissions!!

cfaust
Posts: 313
Joined: Wed Sep 15, 2004 2:24 pm
Contact:

Post by cfaust »

10% seems to be the norm, but not all dealers use the same suggested MSRP in determining the base price.
Image
1996 318ti - Street
1989 325is - Track
1988 M3 - Garage
2005 Expedition - Tow

s38junkie
Posts: 228
Joined: Sun Mar 05, 2006 4:09 pm

Post by s38junkie »

I'll drive 120 miles roundtrip to buy parts from Circle. They are simply the best dealer in the tri state area.
Mike K

1972 Citroen SM
1989 Milano Verde
1989 Mondial t Coupe
1989 Peugeot 405 Mi16
1992 300D 2.5 Turbo
1993 900 Turbo
2001 E55

jnscaldwell
Posts: 1102
Joined: Mon Oct 29, 2007 2:53 pm
Location: Millstone Twp., NJ

Post by jnscaldwell »

s38junkie wrote:I'll drive 120 miles roundtrip to buy parts from Circle. They are simply the best dealer in the tri state area.
I agree. They are about 40 minutes for me each way. BUT, the service is great, very accurate, and friendly. Totally the best and well worth the trip. Plus, I get to give Tim M. a hard time if he's working when I go to pick up parts. That alone is worth the trip :D
17 F15 X5 40e
17 F25 X3 28i MSport
11 E92 M3 ZCP
04 E46 325cic
93 E36 325is - JS #172
12 Ford F350 King Ranch dually

BJerolimic
Posts: 747
Joined: Wed Sep 15, 2004 2:24 pm
Location: Glen Ridge, NJ . . . . . . '98 318ti - '01 M5 - '08 X5

Post by BJerolimic »

Fwiw I have had luck getting Internet prices with local pickup at Morristown BMW, no extra CCA discount but often it is better than with our discount. The prices usually match Tischer from what I have seen
Image

and gone but not forgotten:
'00 323Ci Steel Grey / Black Dinan & UUC & Schnitzer mods
'89 325iX Diamond Black / Black 4dr 5spd Dinan chip, Ireland exhaust, H&R+Koni
'01 525iTa

s38junkie
Posts: 228
Joined: Sun Mar 05, 2006 4:09 pm

Post by s38junkie »

jnscaldwell wrote:
s38junkie wrote:I'll drive 120 miles roundtrip to buy parts from Circle. They are simply the best dealer in the tri state area.
I agree. They are about 40 minutes for me each way. BUT, the service is great, very accurate, and friendly. Totally the best and well worth the trip. Plus, I get to give Tim M. a hard time if he's working when I go to pick up parts. That alone is worth the trip :D
I'm going to amend this to say: only worth the trip if you give Tim a hard time. Getting discounted parts is just a bonus.
Mike K

1972 Citroen SM
1989 Milano Verde
1989 Mondial t Coupe
1989 Peugeot 405 Mi16
1992 300D 2.5 Turbo
1993 900 Turbo
2001 E55

Post Reply