New Jersey BMW CCA

I need to email BMW guru Ben Thongsai. Anyone have his email address? You can reach me at vic.njbmwcca@gmail.com.

Thanks.

Vic Sr.

There us a product by Chomp called "Pull It Out" that will greatly reduce if not eliminate oil stains in concrete. Home Depot has it. Re painting your floor, the instructions for the 2-part paints I have used required etching the concrete surface with a muriatic-acid solution. I don't know how good ...

>but evidently, they may be giving up on the terrible RFT tires in the rest of the lineup as well. Does this mean upcoming models will have at least provisions for a spare wheel/tire? Or will we get regular tires and a "mobility kit"? Or maybe we will be expected simply to pull over and call our nea...

I am reducing the price to $580.

In the original ad I neglected to state why the wheels and tires are for sale: We no longer have our beloved E30 eta.

Email me at vic.njbmwcca@gmail.com.

Thanks.

Bump...

New in box front-left [driver-side] genuine BMW replacement fender. 41 35 1 979 483

Listed as fitting all E30s except the M3.

Best I see it listed for in line is $231 [New, OE].

$125

I also have a separate ad for E30 wheels and tires. How about a package deal?

vic.njbmwcca@gmail.com

Just in time for the driving season! Set of 4 D-Force 4-lug, 15 x 7 [ET 25] light-alloy wheels with mounted/balanced Yokohama S-Drive summer tires [205-55 R15 88W]. Tires and wheels in like-new condition. $625. See all the good features of D-Force wheels on the UUC website. Email me at vic.njbmwcca@...

bump...

We are selling our one-owner, non-smoker, 4-bedroom, custom-built, brick ranch home and detached 3+ bay heated, air-conditioned, 2-story shop [with Mohawk lift]. This is the shop where the Philes' Forum photos are taken. Would like to see the place go to folks who will appreciate and care for it as ...

I second Ray's advice, and suggest you bite tbe bullet and spring for an OE coil. If you succeed in getting access to a scanner capable of displaying BMW's smooth-running values, you will have to have an assistant view them while the misfire occurs, as my observations are that the values will return...

Although Ed is absolutely correct that the carrier preload is best set with the pinion out, you can get by with it in. Measure the total torque to turn the pinion with the old carrier in, then set the preload on the new carrier to match the torque value you recorded with the old carrier in place. Of...

1 pair Zimmerman OE-quality front brake rotors 324 x 30 mm.
1 set Pagid OE-quality front brake pads.
Fit E39 540i, 540it, 525it, 530i.
This is the good stuff. Not Internet junk.
$175
Email me at vic.njbmwcca@gmail.com.

>the old school sprung hub Sachs clutches were the best things ever bolted to a BMW single mass flywheel.< That bears repeating. I believe that one reason BMW went to the D-M flywheels was to reduce the gearbox clatter one hears when idling in neutral with the clutch engaged. Especially with modern ...

You can make an inch-ounce-measuring device with a ruler and some fishing weights or large nuts and washers of known weight. Bolt it to the pinion flange and set preloads to your heart's content.

Six 13 x 6 authentic BWA [look like Panasports] alloy wheels with the correct offset for a 2002, stock or lowered. These are NOT E21-fitment wheels used on a 2002. I took these off my racecar when I converted to 15". These wheels clear tii/528i brakes. I have center caps for 4 of the wheels and lugn...